Hazardous environment sensors are vital for ensuring safety and operational efficiency in extreme conditions. From explosive atmospheres to high-temperature or high-pressure environments, these sensors are designed to deliver reliable performance when it matters most. At Everight Position, we provide advanced solutions engineered to withstand the harshest conditions and meet stringent safety standards.
POSITAL’s UL rotary encoders for hazardous environments offer users mutliple user interfaces and mounting options at an economical price point are complicated machines which must perform flawlessly under the harshest conditions.
The intrinsically safe H117 is CSA approved for use in potentially explosive gas/vapour and dust atmospheres. It is designed for industrial and scientific feedback applications and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas.
Overall performance, repeatability and stability are outstanding over a wide temperature range. The unit is very compact and space-efficient with a small 19mm diameter body. The sensor is very robust, the body and push rod being made of stainless steel. The sensor is easy to install with mounting options including M5 male stud and M5 rod eye bearing. The push rod can be supplied free or captive, with male M5 thread or M5 rod eye. Like all Positek sensors, the H117 provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-350mm and with full EMC protection built in. The H117 offers a range of mechanical options, environmental sealing is to IP67.
Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier . Approved galvanic isolation amplifiers (G005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.
The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.
The intrinsically safe X130 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for demanding hydraulic or pneumatic cylinder position feedback applications where service life, environmental resistance and cost are important and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas.
Overall performance, repeat-ability and stability are outstanding over a wide temperature range. The unit is highly compact and space-efficient, being responsive along almost its entire length. Like all Positek sensors, the X130 provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 0-400mm to 0-1485mm and with full EMC protection built in.
The sensor is very rugged, being made of stainless steel with an inert fluoropolymer-sheathed probe and stainless steel target tube. The sensor is easy to install in cylinders and has a wide range of mechanical options. Environmental sealing is to IP65 or IP67 depending on selected cable or connector options.
Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier . Approved galvanic isolation amplifiers (X005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.
The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.
The intrinsically safe 10 bar H114 is an CSA approved affordable, durable, high-accuracy position sensor.
The H114, like all Positek sensors, provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-800mm and with full EMC protection built in. The sensor is very robust, the body and push rod being made of stainless steel for long service life and environmental resistance. Derived from the popular H101, the H114 has been designed for applications where the sensor may be completely submerged in water up to a pressure of 10Bar, but good sensor performance and cost are still important.
Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier. Approved galvanic isolation amplifiers (G005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.
The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.
The MR342 series ZapFree® Fiber Optic Incremental Sensor is an entirely passive, intrinsically safe, fiber optic incremental rotary encoder ideal for a wide range of harsh and hazardous environmental applications. The passive, all-optical Sensor connects to the remote Controller via a standard duplex 62.5/125 multimode optical fiber link. The remote MR340 Controller Module transmits and converts optical signals to/from the Sensor. The Controllers multiple built-in interfaces insure compatibility with industry standard motor drives, PLCs, quadrature counters, and motion control system.
The intrinsically safe 10 bar M115 is a heavy-duty ATEX and IECEx approved version of the M114 sensor with a stronger 12.6mm push rod, recommended for applications where vibration is an issue or there is a need for longer travel sensors are to be mounted horizontally between rod eyes. It remains an affordable, durable, high-accuracy position sensor designed for applications whereIP68 sealing is required up to a pressure of 10Bar. The unit is highly compact and space-efficient, being responsive along almost its entire length. Like all Positek sensors, the M115 provides a linear output proportional to displacement. Each sensor is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-800mm and with full EMC protection built in.
The sensor is very robust, the body and push rod being made of stainless steel for long service life and environmental resistance.
Overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor is easy to install with mounting options including stainless steel M8 rod eye bearings and body clamps. The push rod can be supplied free or captive, with female M8 thread, or an M8 stainless steel rod eye. The M115 also offers a wide range of mechanical and electrical options, environmental sealing is to IP68 10Bar.
Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier . Approved galvanic isolation amplifiers (X005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.
The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.
The intrinsically safe H111 is CSA approved for use in potentially explosive gas/vapour and dust atmospheres. This heavy-duty version of the H101 sensor with a stronger 12.6mm push rod, recommended for applications where vibration is an issue or there is a need for longer travel sensors, mounted horizontally, and supported between rod eyes. It remains an affordable, durable, high-accuracy position sensor designed for industrial and scientific feedback applications. The unit is highly compact and space-efficient, being responsive along almost its entire length. Like all Positek sensors, the H111 provides a linear output proportional to displacement. Each sensor is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-800mm and with full EMC protection built in.
The sensor is very robust, the body and push rod being made of stainless steel for long service life and environmental resistance. Overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor is easy to install with mounting options including M8 rod eye bearings and body clamps. The push rod can be supplied free or captive, with female M8 thread, an M8 rod eye, or dome end, Captive push rods can be sprung loaded, in either direction, on sensors up to 300mm of travel. Environmental sealing is to IP65 or IP67, depending on selected cable or connector options.
Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier . Approved galvanic isolation amplifiers (G005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.
The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.
The MR430 series ZapFREE® Fiber Optic Position Sensor is a small form factor, rotary position sensor with 13-bit, single-turn resolution.
The MR430 features an innovative design which enables new applications and OEM product features not formerly possible with electronics-based sensors.
The sensor is 100% passive and is unaffected by EMI, RFI, microwaves and magnetic fields. The innovative, alldielectric design also provides 100% electrical isolation and immunity to high voltages & lightning.
Choosing the correct sensor for hazardous environments is critical to maintaining safety, compliance, and performance. Here are the essential factors to consider:
By carefully evaluating these criteria, you can select a hazardous environment sensor that ensures safety, compliance, and optimal performance in your application.
Our hazardous environment sensors are trusted across industries to provide safety and performance in challenging conditions, including:
Monitor pressure, temperature, and flow in refineries, pipelines, and offshore platforms.
Ensure safe operations in facilities handling volatile or corrosive chemicals.
Optimize safety and performance in underground operations and drilling rigs.
Comply with safety standards in environments with combustible dust or extreme temperatures.
Enhance monitoring in environments with high heat and pressure, such as turbines and boilers.
Everight Position offers a diverse range of sensors engineered for hazardous environments. Our product line includes:
Designed to contain and isolate potential ignition sources.
Reduce energy output to prevent ignition in flammable atmospheres.
Built to withstand exposure to aggressive chemicals.
Capable of performing reliably in extreme heat conditions.
Measure multiple parameters like temperature, pressure, and vibration simultaneously.
Tailored sensors designed to meet specific application challenges.
Our sensors combine durability and precision, ensuring they meet the demands of even the most extreme environments.
At Everight Position, we understand the complexities of working in hazardous conditions. Our team of experts is here to help you select, implement, and maintain the ideal sensors for your needs. We provide:
Trust Everight Position for advanced hazardous environment sensor solutions that prioritize safety, compliance, and reliability. Contact us today to explore our product offerings and discover how we can help protect your operations.
Have questions or need help finding the right solution? Our team is ready to assist.